E-bike installation of BURCHDA RX80/RX50

Since 95% of the bicycles have been installed, the rest can be installed directly after receiving.

1. The front wheels of the bicycle you receive are separated from the bicycle body.

2. Install handlebar riser

3. Stick the front fork on the quick release

4. Adjust the center position of the tire so that the positions on both sides are the same

5. Tighten the left and right nuts as shown

6. Install the lights and fenders, and connect the light wires (note that the arrows at both ends of the wiring correspond)

7. Install the fender bracket screws

The installation method of RX50 and RX80 is the same.

A full installation description refer to https://burchda-official.com/pages/user-manuals 

Back to blog


1 of 12