E-bike installation of BURCHDA RX70/RX20

Since 95% of the bicycles have been installed, the rest can be installed directly after receiving.

1. The front wheels of the bicycle you receive are separated from the bicycle body.

2. Install handlebar riser

3. Insert one end of the quick release lever into the center hole of the front wheel.

4. Install the spring and nut at the other end of the quick release lever.

5. Stick the front fork on the quick release

6. Adjust the center position of the tire so that the positions on both sides are the same.

7. Turn Quick Release to lock the front wheel and secure Quick Release

8. Install the lights and fenders, and connect the light wires (note that the arrows at both ends of the wiring correspond)

9. Install the fender bracket screws

The installation method of RX20 and RX70 is the same.

A full installation description refer to https://burchda-official.com/pages/user-manuals 

Back to blog

BEST SELLERS

1 of 12