Some friends may have triggered non-zero start when adjusting the instrument settings while using HC26.
When non-zero start is triggered, you need to step on the pedal first.
After the HC26 ebike reaches a certain driving speed, the throttle will take effect.
So how to turn off non-zero start?
KD926 instrument zero start setting:
1. Press and hold the ➕➖ keys at the same time to enter the setting interface, then press and hold the ➕ and ➖ keys at the same time to enter the advanced interface
2. Short press the ➖ key to enter the 2os interface, then short press the ➕ or ➖ key to set the parameter below to OFF
3. After setting, press and hold the i key to save, and press and hold the i key again to exit the interface
If you have any questions, please feel free to contact our customer service.
